Camera connection \ Storage
In top right corner you can navigate to DF settings. If you scroll down, you can configure Event sources, which allows for to set camera’s:
▪ Name – enter your preferred name
▪ Serial number of cameras. Every camera must be configured to send events to the DF.
▪ Host address – for fast access to the camera's web page Press the “Add” button to finalize adding the camera.
Below event sources config you will find Storage setup menu.
▪ Name – enter your preferred name
▪ Serial number of cameras. Every camera must be configured to send events to the DF.
▪ Host address – for fast access to the camera's web page Press the “Add” button to finalize adding the camera.
Below event sources config you will find Storage setup menu.
Related Articles
Changing the path of the DF storage
To ensure that images are stored in a new path, follow these steps: 1. Run the installer for the Data Factory software. 2. During the installation, you will be prompted to specify the installation path. 3. Select the new path where you want the ...NumberOK connection
General Settings: Cloud URL: This field allows you to specify the Cloud URL for uploading camera events. For example, the default Cloud URL may be "http://localhost:5001/api/camera/events/upload." Please note that "http://localhost:5001" represents ...WisenetRoadAI, RoadWatch connection
For events sending you have to go to the camera application and configure the data sending. Make sure, that port 5001 on Data Factory host is open (added Inbound rule) Register the camera in DataFactory with its Serial Number (Standalone mode) ...CAMMRA AI connection
▪ In Integration – Push events menu choose one of the profiles, HTTP POST as protocol, insert server URL: http:// 10.0.5.100:5001/api/camera/events/upload (example) ▪ Fill in Device ID and enable sending event types, you can choose any, but “lost” is ...CAMMRA / CAMMRA Lite and Axis License Plate Verifier connection
For events sending you have to go to the camera application and configure the data sending. Make sure, that port 5001 on Data Factory host is open (added Inbound rule) Go to Integration tab, choose HTTP POST protocol, insert DF server URL address ...