Reactions

Reactions

Reactions: General Information

Reactions can be employed to manage access, have standalone visual and/or audial alerts, and/or to supplement Checkpoint and Parking modes with alerts.

When supplementing Checkpoint and/or Parking modes with Reactions, please, manage barrier/gate via checkpoint settings. In this case you can also employ relay to fire additional devices (e.g. traffic lights) via Reactions.

You may want to setup multiple reactions. There are two modes of active reactions execution:

  • run all active reactions, where conditions match;

  • execute first matching reaction only.

Reaction setup

Under Car database > Reaction click Add and

  1. name the reaction and describe it;

  2. select event type and set conditions the reaction would fire on (details are in the following sections);

  3. assign one or more reaction methods;

  4. optionally assign a time schedule for the reaction;

  5. click Ok to save the settings.

Reaction methods

Method

Designation

Specific settings

Visual reaction

Mark the event in report


Sound signal

Get audio alert


Relay action

Manage relay via I/O module

Select a connected I/O module

(https://goo.gl/FTPc1d *) relay from a drop-down list. List entries follow the template:

X.Y:NetID / Relay#, where X & Y represent two latest bytes of the device IP address, Relay# normally corresponds relevant device DO.


Choose action: Close circuit, Open circuit, Switch circuit state.

Select command duration.

Window

Get pop-up alert


Add description

Add reaction description to recognition results listing


Send email 

Send  image and license plate to choose email 

Require add recipient firstly 

Some methods are not available for specific event types.

Conditions setup

Certain conditions are only available when relevant operation mode is activated under Settings > General.


Recognition

The reaction will fire if every checked condition is fulfilled.

Plate number: exact match required

Type of car or group options: LP is not in database or LP belongs to a specified group or LP doesn’t belong to a specified group.

Channel / Zone: LP is recognised in a specified zone of a particular channel.

Change Channel / Zone: LP is recognized in first specified Channel / Zone and then in the second specified Channel / Zone.

Direction: when LP movement direction is either Entry or Exit or Undetermined.


Checkpoint

The reaction will fire if every checked condition is fulfilled.

Checkpoint: event is associated with a particular checkpoint.

Type of car or group options: LP is not in database or LP belongs to a specified group.

Direction: Try entry (attempt to enter) or Entry (confirmed drive-in) or Try exit (attempt to leave) or Exit (confirmed drive-out).

Duration of stay: longer than H hours and M minutes and optionally shorter than X hours and Y minutes.

Access control: Allowed or Denied; if Denied then additional filtering is available: denied since LP wasn’t allowed at the time given; denied for visits limit exceeded; denied for duration condition violation.


Parking

Select parking to apply the reaction to.

The reaction will fire if every checked condition is fulfilled.

Type of car or group options: LP is not in the database or LP belongs to a specified group.

Cars on the territory: more than X cars and optionally less than Y cars.


Frequency violation

Reaction will fire if any LP appears on a specified Channel at least a specified number of times within the time interval specified.

Reaction scheduling is not available for this type of reaction.


Traffic rules

Available only in NumberOk Enterprise edition.

Select specific violation to apply reaction to.

The reaction will fire if every checked condition is fulfilled.

Plate number: exact match required

Type of car or group options: LP is not in the database or LP belongs to a specified group or LP doesn’t belong to a specified group.

Channel / Zone: LP is recognised in a specified zone of a particular channel.

Direction: when LP movement direction is either Entry or Exit or Undetermined.


Average speed

The reaction will fire  if every checked condition is fulfilled and speed limit set under Settings >General  >Traffic rules > Average speed is exceeded.

Plate number: exact match required

Type of car or group options: LP is not in the database or LP belongs to a specified group or LP doesn’t belong to a specified group.

Channel / Zone: LP is recognised in a specified zone of a particular channel.

Direction: when LP movement direction is either Entry or Exit or Undetermined.




    • Related Articles

    • Access control: Parking

      Access control: General information Turn on Parking mode at the tab Settings > General. Parking parameters setup Set up car park checkpoints at the Checkpoint tab. Warning! For correct work of Parking mode, you need to set up Allowed to everyone ...

    • Feature comparison table

      Key features (comparison across editions) Lite SMB Enterprise Meta Reporter ANPR Sources IP cameras Y Y Y n/a n/a DVR Y Y Y n/a n/a Video file Y Y Y n/a n/a ANPR camera n/a n/a n/a Y n/a Results refinement analytics Y Y Y n/a n/a # of source channels ...

    • Managing NumberOk via DataBase

      Intro Managing NumberOk via FireBird database is considered an unsupported non-documented method. The database is accessible from outside NumberOk and access to the database should be restricted on OS and file system levels. NumberOk vendor doesn’t ...

    • Reports

      Important note Please, note that Reporter may show event snapshots (images) with a delay 30 to 60 seconds. The reason is that major event data becomes available instantly while images have to be first stored to a disk on a remote computer the event ...