Storage (SD-card) recommendations

Storage (SD-card) recommendations

CAMMRA application can work either using internal device storage, or using SD-card storage if it is available.

It is recommended to use SD-card in traffic solutions where data is being sent to external systems. This will prevent data loss in case of connectivity issues.

In case internal device storage is used, CAMMRA application will be able to store limited number of events depending on the stored image settings:

  • Full Frame - 3 images

  • Vehicle crop - 10 images

  • LP crop - 1000 images

CAMMRA application monitors SD-card status, so whenever SD-card becomes available, application will restart and switch storage usage from internal device to SD-card.

To store larger number of events (up to 100k), it is recommended to have SD-card installed and mounted on camera device:

  • Install SD-card (128 GB recommended for full-frame images storage)

  • Go to the camera web page

  • Go to System > Storage

  • Make sure SD card is turned on, mounted and formatted after first setup

  • Whenever SD card is installed, CAMMRA application needs to be restarted

  • SD card shouldn’t be disabled while CAMMRA application is running

    • Related Articles

    • Camera mounting recommendations

      Camera Mounting Angle: The camera's mounting angle should not exceed 30°. This ensures that the camera captures the desired field of view without excessive tilting, which can affect the accuracy of the captured data. Horizontal License Plate ...

    • A&E specifications

      CAMMRA This edge app, installed on the Artpec 6, 7 and 8-based cameras, enables complex vehicle recognition including reading the license plate, recognizing vehicle make (brand), model and colour in both slow- and high-speed and multi-lane scenarios. ...

    • JSON Fields (Protocol 1.6) \ JSON example

      Token Type Format / Value Description packetCounter Unsigned int Counter of packets. Starts from “1”. Counter starts after successful connection or after start of device. It does not matter. datetime string YYYYMMDD HHMMSSFFF YYYY - year 4 digits MM ...

    • Settings for Stored Events

      To configure the storage settings for events in CAMMRA, follow these steps: Select the Type of Events to be Stored: Choose the type of events that should be stored based on your requirements: All: All events, including both whitelisted and ...

    • Setting up Camera Settings

      To configure the camera settings for optimal performance, follow these steps: Set the Camera Password: Ensure that the camera is protected with a strong password to prevent unauthorized access. Access the camera's web interface and navigate to the ...